Basic Info.
Model NO.
E320-16
Slag Characteristic
Acidic
Stainless Steel Welding Rod Type
Chromium Nickel Stainless Steel
Function
Surfacing Electrode, Low Hydrogen Type Electrode, Hardfacing Electrode
Welding Power
DC/AC
Our Services
Samples Can Be Provided for Free; OEM Is Accept
Operating Current
International Standard
Operating Temperature
International Standard
Transport Package
5kg/Box, 20kg/Carton
Specification
2.5mm/3.2mm/4.0mm/5.0mm
Trademark
TYUE
Origin
China
HS Code
831110000
Production Capacity
20 Tons
Product Description
Tyue High-Quality Aws E320-16 Stainless Steel Welding Electrode/Rod
Chemical Composition of E320-16
Chemical Composition of E320-16
| C | Mn | Si | S | P | Ni | Mo | Cu | Nb+Ta | Cr |
| 0.05 | 1.20 | 0.40 | 0.020 | 0.020 | 35.0 | 2.50 | 3.5 | 0.55 | 20.5 |
Description and Applications
E320-16 coated electrodes are used for welding Carpenter 20 or 20 Cb-3 stainless steel. Often referred to as 320Cb-16 or 20 Cb-3*, this electrode produces weld deposits that resist chemical corrosion from sulfuric acid, phosphoric acid and their salts. E320-16 is used to weld both castings and wrought alloys of similar analysis without having to do post-weld heat treatment. The Columbium (Cb) content of this electrode gives 320-16 weld deposits excellent resistance to intergranular corrosion.
Procedure
Clean the work area. Preheating is not required. Use DC+ (reverse polarity), however, an AC machine with a minimum open circuit voltage of 70 volts can be used. The welding current should be kept to a minimum and the welding speed at a maximum to avoid overheating and distortion. The arc length should be kept as short as
possible without touching the flux-coating of the electrode to the molten weld pool. The electrode should be tilted 15° in the direction of travel. Stringer beads should be used in the flat, horizontal, & overhead positions.
Vertical welding should be done using the weaving technique but not exceeding 2-3 times the diameter of the electrode. Be sure to remove all slag before making additional passes. On the final pass, allow the part to cool before removing the slag cover.
Typical Weld Metal Properties
AWS Spec
Tensile Strength: 85,000 psi
Yield Strength: 57,000 psi
Elongation: 34%
Recommended Parameters
SMAW AC/DC+ (Electrode Positive)
Wire Diameter Flat Amperage Vertical & Overhead Amperage
3/32" 70-85 65-75
1/8" 85-110 80-90
5/32" 110-140 100-120
3/16" 120-160 110-130
Our Other Welding Products
If you are interested, please click on the below picture to enter the link
If you are interested, please click on the below picture to enter the link
| FAQ |
Q: What is delivery time / lead time ?
A: 2-3 weeks.
Q: What is your minimum order ?
A: 3000kgs/each size. (MOQ for stainless steel welding electrode)
Q: Can we visit your factory ?
A: Yes. Welcome to visit our factory at any time.
Q: Can you provide free sampe ?
A: Yes. Free samples are available for you.